This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
hello everybody,
I have actually an multiplus 12/1600/70-16 plug to my Venus GX.
I want to switch ON/OFF the multiplus thank a request MQTT.
Actually i read all data from MQTT. but i don't find information to switch on/off the multiplus with a MQTT command line.
Somebody can help me?
I've done this. The topic is W/<portal ID>/vebus/257/Mode to set the state. There are 4 states that you set with a json object with value an attribute e.g. {"value":1}, 1=Charger Only;2=Inverter Only;3=On;4=Off. To read the current state you need to subscribe to N/<portal ID>/vebus/257/Mode and then send a read request by posting an empty message to topic R/<portal ID>/vebus/257/Mode.
Update:
Anybody reading this should familiarise themselves with Victron's dbus-mqtt gateway by reading this: https://github.com/victronenergy/dbus-mqtt
Strange enough, I can subscribe to a topic and read the value easily from the same android phone. I am wondering what am i missing. Would you perhaps know?
Thanks
Hi @gone-sailing , thanks for the response.
I have attached screenshots of my writes/published code.
My request looks something like this:
topic: W/<portal_id>/vebus/276/Mode
Publish: W/<portal_id>/vebus/276/Mode' -m '{"value":1}'
I have tried with "R" and with "N" as a topic. Not really sure if that makes a difference, don't understand it too well. From Windows (gitbash), my mosquitto_pub.exe command is as follows:
./mosquitto_pub.exe -t 'W/<portal_id>/vebus/276/Mode' -m '{"value":1}' -h mqtt73.victronenergy.com -u USER -P PASSWORD--cafile "<PATH_TO_CA_FILE>" -p 8883
I'm not sure what is the payload you mentioned, could this be perhaps what I'm missing?
Any help is appreciated.
MSG_OK.jpgPUBLISH_VALUE_1.jpgVALUE_AFTER.jpgWRITE_DETAILS.jpg
The payload (as I would call it) is the actual message you are sending to the topic. From the command line you specify it with the -m option. The contents of your message is {"value":1}
Looking at your screenshot write-details.jpg, where the app want you to specify the topic name you have include the topic name followed by -m and the message. I very much doubt that is what the Android app is expecting. There must be another field somewhere on that page where you can enter the message to send. You do not use the -m with the app, that is just an option for the command line tool.
Your subscribe topic is not correct either. Topic's starting with R are where you send read requests, the actual values are returned in the topics starting with N. Come to think of it, unless your app will periodically send the keep alive messages that Victron's dbus-mqtt api requires, you will only receive updates for about the first minute.
You really need to read this: https://github.com/victronenergy/dbus-mqtt
Have you tried to encapsulate the value in double quotes? Like this: '{"value":"1"}'
Thanks for the response. Yes, tried adding double quotes as well as played around with the spacing and double quotes. Still doesn't seem to accept the updated value.
Am I supposed to receive a JSON response after the update to confirm the value is changed or does an update return no response?
Thanks again.
