Hi Techs,
If you program a periodical Generator test run, while the system is connected to the Shorepower, can you switch to use the Generator power?
Shore is on AC1IN
Gen is on AC2IN
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi Techs,
If you program a periodical Generator test run, while the system is connected to the Shorepower, can you switch to use the Generator power?
Shore is on AC1IN
Gen is on AC2IN
If you switch your inputs around then the inverter will ignore shore power on AC2 in favor of AC1 power (generator)
45 People are following this question.