question

Marco Granai avatar image
Marco Granai asked

Nodered and relay 1

i am trying to control the relays via nodered. i have a problem. relay 2 is working correctly but relay 1 cannot drive. do you have any suggestions?

Node-RED
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
wkirby avatar image
wkirby answered ·

Did you set Relay 1 to manual from the menu options?

https://www.victronenergy.com/live/venus-os:large#controlling_relays

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Marco Granai avatar image
Marco Granai answered ·

the relay was in manual.

I fixed it by disabling and re-enabling victron plugins

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

joshl avatar image joshl commented ·
I had the same problem, and this worked. Thank you for sharing.
0 Likes 0 ·
antrac1t avatar image antrac1t commented ·
have same issue but restart node red plugin not help ... relay1 is set up for manual controll
0 Likes 0 ·
Waldemar Fech avatar image Waldemar Fech commented ·
How? Where?
0 Likes 0 ·
Dirk-Jan Faber (Victron Energy) avatar image
Dirk-Jan Faber (Victron Energy) answered ·
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.