I have a Victron dc dc charger as follows:
Orion-Tr Smart 12/12 30A ISOLATED DC-DC Charger
Screenshot_20220208-172935[1].jpgScreenshot_20220208-172316[1].jpg
Just wondering why I get these screens showing whilst I am driving
Thankyou
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a Victron dc dc charger as follows:
Screenshot_20220208-172935[1].jpgScreenshot_20220208-172316[1].jpg
Just wondering why I get these screens showing whilst I am driving
Thankyou
Probably the settings. Please post a screen shot of the settings from the cog icon.
And how is it wired?
12.8V is pretty low for starter battery / alternator voltage if the engine is running. What kind of alternator do you have?
By default the engine shutdown detection enables charging when voltage is >13.8V, and stops it when dropping below 13.5V.
You might also want to check the wiring to the Orion. Is it thick enough and connected properly? There could be some voltage drop there.
Additional resources still need to be added for this topic
25 People are following this question.