question

stealth avatar image
stealth asked

control output of peak power pack with VE.Direct Bluetooth Smart Dongle

I have a Peak Power Pack. Is is possible to control the outputs via app if I buy a VE.Direct Bluetooth Smart Dongle?

BluetoothPeak Power Pack
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

1644083987487.png (48.9 KiB)
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

stealth avatar image stealth commented ·

Thx, didn't found the information within the manuel.

0 Likes 0 ·
mike4nl avatar image mike4nl stealth commented ·

Hi @WKirby
Yes these functiosn are normal.

In the Datasheet you find also:
-> Hold down for 5 seconds: storage mode, blue LED flashes 10 times , yes that woeks fine

That is the Hibernate mode.
-> But how i get back the output because when in Hibernate the Bluetooth Smart Dongle no longer works. And the button does not react on any input (pushed for 30 min ON or allways ON)

PPP - 12,8V/8AH - Version 1.08

Is there something that i'm missing here?

0 Likes 0 ·

Related Resources

Peak Power Pack Product Page.

Peak Power Pack Manual PDF.

Additional resources still need to be added for this topic

VictronConnect bluetooth troubleshooting guide