This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
If my WiFi router is turned off Venus GX will not automatically re-connect to router when router is turned on again. The only way to get GX to reconnect is to remove power cable and replace it - in effect rebooting the GX. The WiFi signal to the router is good at 75% and has disconnected and reconnected without a problem in the past.
OK, sounds like it isn't from the new OS release. Contact your supplier, may need to be replaced.
Same for me. WiFi needs to be up before Venus boots in order to connect.
I put a switch in the power cable to power off and on if I don’t want to wait for the “automatic reboot” timeout.
same for me with easysolar gx. also when WLAN is rebooting the GX dont reconnect automaticly.
Only reboot helps. i know the automatic restart option.
