This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
@Jean-Luc T. no problem at all connecting the Orions in parallel. I installed two 24/12-30's in parallel a couple of weeks ago, I used the remote's to give me the ability to run 1 or both.
Cheers
Wayne
No, you can use a common bus, in my case i have two power lockers and I ran a single cable from the start battery and split where I mounted the two units, the 12v output you can see the two feeds go into a twin fuse block then connect to large pos bus that goes back to the house batteries.
Additional resources still need to be added for this topic
24 People are following this question.