question

soenke avatar image
soenke asked

Starter Battery Voltage in VRM Portal with SmartShunt (Cerbo 2.80)

Hi,

I have seen some Screenshots showing the starter battery voltage in VRM Portal. But I can't get it to work.
I have a SmartShunt connected to my main battery, the auxiliary measurement is connected to the starter battery. SmartShunt (Firmware 4.08) is connected to Cerbo GX with 2.80 firmware. In the Cerbo I have activated the starter battery measurement under Settings/System Setup/Battery Measurements. But it does not show up.

Do you have any suggestions?

thanks!


VRMVenus OS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

4 Answers
soenke avatar image
soenke answered ·

Problem solved with 2.82 firmware!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image
kevgermany answered ·

Not sure where you're looking, but try the advanced screen, you may have to turn on the widget for it.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

soenke avatar image soenke commented ·
I should have mentioned, under "Advanced" I turned the widget on and it is visible and data is shown. So in general the data is correctly transferred to the Portal.

But nothing is shown at the Dashboard. The "tile" at the dashboard is missing.

0 Likes 0 ·
ejrossouw avatar image ejrossouw soenke commented ·
@soenke Did you enable "Show Details" on the VRM dashboard?
0 Likes 0 ·
soenke avatar image soenke ejrossouw commented ·
Yes.
0 Likes 0 ·
soenke avatar image
soenke answered ·

Hi,

I add some pictures from the net showing the Starter Battery Voltage in VRM Portal to get everyone to know, what I mean - what is not showing in my portal.handy.jpeg

pc.png

Second: I deactivated the measurement and activated it back on, but had no luck.

Thanks!


handy.jpeg (329.6 KiB)
pc.png (529.7 KiB)
9 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·

Is the screenshot from before the Venus 2.8 update?

Did you update the shunt firmware?

0 Likes 0 ·
Show more comments
maika avatar image
maika answered ·

Ich habe mit dem CerboGX genau die gleichen Probleme.
"In der "HTML5-App-Seite" wird die Starterbatterie entsprechend der Einstellung im Cerbo angezeigt. Aber im VRM Portal kommt die Anzeige nicht."

Noch wichtiger wäre, dass man die Starter Batterie (zumindest die Volt Anzeige) direkt auf dem Touchscreen in der Übersicht sehen kann.

Aktuell bin ich sehr enttäuscht vom CerboGX. So teuer (+ Touchscreen) und so wenige Möglichkeiten die Ansichten zu verändern..

Gibt es da Möglichkeiten zur Verbesserung?

Ebenso könnte auch der Last Ausgang vom MPPT 100/15 in der Übersicht mit angezeigt werden...

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.