This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi there,
I have a system of Victron multi-plus II 5000 VA and Fronuis inverter 4000 VA with 6 Q-cell Panels Of 580 Watt each and a 4Kwhr BYD lithium battery.
whenever the pv production is low or close to Ac Load (mainly at Sunrise and Sunset or during a cloudy day), some of lights flicker (only a LED strip)
thanks for help
What is the frequency in the system when this is happening. It may be related to that?
Whenever battery is not full, the frequency range is 49.9-50.2.
Whenever the battery is full, the frequency range is 51-52.5.
I will take a look on it tomorrow to get more sure from that.
Thank you Alexandra
Now the battery is 61%, frequency is 49.9-50.1 and the LED strip is flickering
Is the system set up according to the BYD/Victron page? Are there any errors reported on the VRM?
Does the power go out completely? What are your ambient temperatures?
Or is it the battery shutting down? The BMU logging any issues?
There are no errors on VRM there are only warnings about high DC volatge about 56 Volts
Yes the power is completely out.
Temperatures are not high (about 15- 20 celsius )
The battery don’t shut down
Can i have your help by giving you access to my system and take a look on it
This is not as uncommon as we would like it to be. There are several thread with quite a few different PV inverter makes that have the same effect.
https://community.victronenergy.com/questions/3342/flickering-lights-in-home.html this one as an example.
More expensive Led lights are ultimately the solution. The one other possible issue is a poor neutral connection issue, I read in a thread somewhere a while ago.
It is not even just an issue on Victron. I have seen Axpert, Outback and a few other inverter brand users complain.
There are even articles describing the issue and the reasons why.
