question

Lars Filusch avatar image
Lars Filusch asked

multiplus, Cerbo GX & VE.BUS BMS

it is now possible to control the Multiplus ( on/off ) current control via Cerbo GX ?

cerbo gxmultiplus ve.bus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @Lars78,

unfortunately not on/off. Charge current limit can be set using DVCC and Input current limit can also be set using your GX device.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lars Filusch avatar image Lars Filusch commented ·

ich hörte dass das jetzt funktionieren soll mit aktueller FW auf dem Multi... den Assistenten im VEconfig braucht man ja jetzt nicht mehr.

0 Likes 0 ·
Stefanie (Victron Energy Staff) avatar image Stefanie (Victron Energy Staff) ♦♦ Lars Filusch commented ·
Stimmt mit dem Assistenten. Leider nicht für On/Off/Charger Only/Inverter Only.

Das wird meines Wissens nach auch nicht mit dem "alten" VE.Bus BMS funktionieren, weil die hardware das nicht hergibt. Müssen wir wohl auf eine Version 2 des VE.Bus BMS warten.

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic

Cerbo GX product page

GX family product range

Cerbo GX & GX Touch datasheet

Cerbo GX Manual

Venus root access document