question

jokani avatar image
jokani asked

Overload L1 on VE.Bus System

MultiPlus 12-3000-120-16 installed on a boat, currently connected to shore power.

When the incoming AC is exceeded (15a) the MultiPlus starts 'assisting', I receive an immediate email and a a fraction of a second later a 'cleared' email.

Surely the overload load warning should only me issued if the 'assisting 3000w 16a' element is exceeded.

Can I switch this warning off, without removing all warnings?

Other than this warning the system works as expected and I couldn't be happier with it.

multiplus ve.bus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
nickdb avatar image
nickdb answered ·

For reference, the 3000VA would have a limit of 2400W at 25C.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jokani avatar image
jokani answered ·

The inverter 2400v is not being exceeded the alert happens as soon as the incoming AC exceeds 15a,and the Multiplus starts assisting.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic