question

solartech12 avatar image
solartech12 asked

Soc not showing for Quatrro 10KVA on Color gx

My system consists of Axitec Li 10s batteries with Quatro 10kva and 250/100 mppts . I have chosen battery monitor as Can-bus BMS selected and inside services I have chosen the following CAN bus profile but still I State of Charge option is showing --- (see pic1)


I am using terminators at VE.CAN port on colorgx and also at the battery end

screenshot-2022-01-30-231136.png screenshot-2022-01-30-232803.png screenshot-2022-01-30-232956.png

CCGX Color ControlSOCquattro 10kva
screenshot-2022-01-30-231136.png (112.7 KiB)
screenshot-2022-01-30-232803.png (84.6 KiB)
screenshot-2022-01-30-232956.png (130.2 KiB)
10 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@solartech12

With the number of dropped packets I would wonder if the type b cable is ok?

0 Likes 0 ·
Show more comments
ejrossouw avatar image ejrossouw commented ·
Victron documentation suggests you do not require termination at the battery side and indeed it is a type b cable. Do you VE.Can MPPTs?
0 Likes 0 ·
Show more comments
0 Answers

Related Resources

Additional resources still need to be added for this topic

CCGX Product Manual

CCGX Product page