This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, I recently had my van at the garage to have some bodywork repaired, when I got it back home, I discovered that the B2B charger wasn't working. Going back to the garage isn't an option, as it's some distance away.
I've checked the connections and fuse, nothing seems to be amiss and there are 14.4 volts across the input terminals. There's a small wire bridging the two green terminals. 
Image Caption
Image Caption
Image Caption
The small wire is factory fitted, can be replaced by an on off switch.
What would help is if you print off the readings from victron connect.
Why don't you think it's working?
Did they do any welding?
Check that the euroblock holding the bridging wire on the remote terminal is fully seated and the wire itself is secure.
