question

valden avatar image
valden asked

It’s 2022. Is configuring a MultiPlus with Mac or iPad possible yet?

From searching and reading and reading and searching it is still not clear whether I will be able to fully control, configure and update my MultiPlus with a MK3-USB and either a Mac using OS X or an iPad using iOS. Is updated advice available on this please?

I found this in the VE.Bus Configuration Guide, at para 3.3.
An MK3-USB is required to change settings and perform firmware updates and settings. And, as that requires a USB port, it is not possible to change inverter/charger configuration or perform firmware updates on a Apple iPad or iPhone.

My latest model iPad has a USB-C port and with its accessory USB-C to USB adapter it can easily work with USB devices, such as the MK3-USB, I imagine.

In case using an iPad is still a no-go, can a MacBookPro with OS X and MK3-USB provide full control, configuration and updating of my MultiPlus?

People often ask me on my YouTube channel whether they should buy Victron or MasterVolt systems for their boats. I tell them both systems are good but I prefer Victron for its openness, easy user controllability and Apple friendly orientation. I always feel nervous in providing this advice, given the unfathomable situation with respect to Apple unfriendliness of the MultiPlus.

To borrow from an infamous Australian politician, ‘Please Explain?’

Regards, Rick Dykstra. S/V Snow Gum.

MultiPlus Quattro Inverter Chargerfirmware update
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

https://www.victronenergy.com/media/pg/VE.Bus_Configuration_Guide/en/index-en.html

2. Introduction

"VictronConnect connects to the inverters via a USB-MK3 accessory cable, or via the VE.Bus Smart Dongle (both sold separately).

The specific MK3 VE.Bus component is available for Android, Windows, and macOS X (but not iOS)."

Not all settings are available via VictronConnect to configure an ESS or other assistants you still need VE.config.

9 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

valden avatar image valden commented ·
Hi Matthias. Thanks. I read that paragraph too. The inference is that with VictronConnect on a MacBookPro using OS X and with the MK3-USB device I will be able to control, configure and update my MultiPlus, without limitation. But not with an iPad.

Would you agree with this assessment?

If true, this is a very positive development that deserves full publicity. If true, I will buy a MK3-USB device today! :-)

0 Likes 0 ·
Show more comments
ltmonger avatar image
ltmonger answered ·

I am using MAC OS X Big Sur 11.6.4 on 2013 MacBook Air and successfully updated firmware and settings in my Multiplus 3000va 12V. I have 2018 Winnebago View 24J with four LionEnergy UT-1300's in parallel, Victron BMV-712 and SmartSolar MPPT 100/50 plus 480 watts of solar panels(3). I wired system using 1/0 welding cables for intra-connections and 2/0 on the battery bank endpoints. So far the system is behaving well.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

valden avatar image valden commented ·
Hi It. Can you please advise which Victron software you used with your MacBook Air to do the MultiPlus firmware update? Re settings, do you believe you had access to the full scope of MultiPlus settings? Thanks.
0 Likes 0 ·
ltmonger avatar image ltmonger valden commented ·
I used Victron Connect App on Big Sur OS. First updated firmware then adjusted recommended setting for LionEnergy UT-1300's. Not sure if that's what your looking for.
0 Likes 0 ·
vward avatar image
vward answered ·

I'm using an M1 mac with Monterey (12.6) and update VE configure remotely using Parallels desktop and horrible, horrible windows 11 arm beta. Windows nags for a password every so often and will probably try to charge me for the torture of having to use it, but this works. Please, Victron, consider updating VE configure to work with Apple nicely or replacing it? I hate windows and microsoft.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·
Victron is working on VictronConnect to fully replace VE.config but there is no (public) roadmap when it will be finished.
1 Like 1 ·