Hi. I have 2 x Quattros 48/5000/70 and wanting to set up in parallel. My main question is: can they both be wired into the same electrical panel (breaker box)? I tried that a few days ago, and when a load was applied it only sounded as if the “Master” unit was doing all the work. Something didn’t seem right, so I turned off the power and am only using one inverter at the moment in stand alone mode.
Last question: would it be beneficial to set up the two inverters in split phase instead? I am currently in an off grid set up and living in my 5th Wheel camper (50 amp) while I build a house.
Does one option outweigh the other? Thanks for your help!
Note: in the attached picture, the red wire that is disconnected is from the second inverter, and it is currently switched “OFF”. Other than that, is something wrong with the wiring?
Also, I do have the MK3 device and the UTP Cables and am familiar with programming the inverters.