Hi, just curious if I could mount and wire my Lynx system like this:
Don't have a lot of room to work with!
Thanks!
Charles
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, just curious if I could mount and wire my Lynx system like this:
Don't have a lot of room to work with!
Thanks!
Charles
Running them vertically would be better.
You can lay them out as shown. A single arc as in the bottom would be better, the double arc as shown for the top is going to be more difficult.
Be careful of tight cable bend radius, and make sure you are using sufficiently large/rated cables for the interconnects. You don't want any tension on the lug, which seems very likely with this wiring configuration.
Lynx Shunt VE Can online manual
Additional resources still need to be added for this topic
Additional resources still need to be added for this topic
29 People are following this question.