question

brasstacks avatar image
brasstacks asked

Cerbo/GX50 is not showing AC input or AC loads

Set Up a cerbo and GX 50. PV data is showing, Battery info from smart shunt is good, however with the shorepower connected I am not seeing the AC input. I also have no AC loads showing, when i know there are loads on the invertert. I have checked all my connections but still no luck.

Any ideas what it might be?

Thanks all

MultiPlus Quattro Inverter Chargercerbo gxSmartShunt
8 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

604labsdave avatar image 604labsdave commented ·

I had the same issue. I simply plugged the ethernet cable from the Multiplus into the MK3-USB then into the Cerbo and started to see the A.C. data. Not how I wanted it to work or how I understand it to work and definitely something I need to get back to and play with. I will be following this thread!

1 Like 1 ·
Show more comments
Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·
More information please.

What components do you have? Some screenshots maybe?

0 Likes 0 ·
Alexandra avatar image Alexandra ♦ commented ·
Definitely more information needed here @Brasstacks


But it could be the inverter is not communicating with the GX, or there is a fault with the GX.

Have you tried updating it?


0 Likes 0 ·
Show more comments
1 Answer
sl000014 avatar image
sl000014 answered ·

iam connected on real time but i cannot see my multiplus 2 and my battery i dont what could be the problem

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.