I have a question about the multiplus config when used with a lynx BMS and smart lithium batteries. I changed the battery type to "smart lithium with VE Bus BMS" and once doing that, I got all kinds of errors on my GX device. the errors would go away if I unplugged either the MPII or the BMS from the cerbo but the config did not like having both connected at he same time. My assumption is that the lynx is not technically a VE bus BMS but actually a VE Can bms so having the "configured for VE Bus BMS" box checked was causing issues. After changing the battery type to lithium batteries the errors went away. I am wanting to know if my assumption is correct and lithium is the option that needs to be checked or if it should work under my previous configuration?