Hi all, I'm have some issues with the way my setup seems to be reading the SOC for my battery bank. the system seems to be saying that I only have a 30% SOC however when I test the individual batteries with my Multimeter they all have 13.5v which I beleive means they are at 100%? is there something I need to reset within the system?
System set up as follows:
Off-Grid system
Product MultiPlus-II 48/3000/35-32 (ACOut2 switchable)
Firmware version 478
SmartSolar Charger MPPT 150/70 rev2
Firmware version v3.07
battery bank made up of 2 parallel banks of 4 12v 100ah Lithium-ion batteries
using a
Color Control GX
Firmware version v2.73