question

kuban-invertor avatar image
kuban-invertor asked

Flickering diode lamps in invert mode

Hello everyone! Calculating. for your help!

There is a backup power supply system.

1. Three Quattro 8000/48 inverters

2. Pylontech 800 Ah batteries

3. Cerbo GX+Touch panel.


The problem is the flickering of the diode

lamps in the "invert" mode. When the mains is on,

the lamps do not blink. These lamps are dimmer controlled.

I am attaching a photo of the lamps and the dimmer.

Question: how can this be cured / corrected? Thanks!


MultiPlus Quattro Inverter Charger
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kuban-invertor avatar image kuban-invertor commented ·

Lamp

b6707d6f-9228-4423-a5d3-df99e8ecdc72.jpg05d3db6c-62c4-4772-a94f-1d8920a25e6b.jpg2ba971e5-f324-44d9-8333-1d7c86d40220.jpg

0 Likes 0 ·
b6707d6f-9228-4423-a5d3-df99e8ecdc72.jpg (47.4 KiB)
05d3db6c-62c4-4772-a94f-1d8920a25e6b.jpg (62.4 KiB)
2ba971e5-f324-44d9-8333-1d7c86d40220.jpg (48.4 KiB)
kevgermany avatar image kevgermany ♦♦ commented ·

What are the inverter settings? Could be you have a power saving mode set and the light load isn't enough to keep the inverter running. Does the lights still flicker if you increase the ac load?

0 Likes 0 ·
1 Answer
Mike Dorsett avatar image
Mike Dorsett answered ·

If the lamps are the only load when this happens, is the AES causing the problem?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.