question

daniel1957 avatar image
daniel1957 asked

help need with system setup

I already have a 2000Ahr battery system, 5kw PV array and backup diesel generator.

My previous inverter/charger blew up in a lightning storm.

On advise from seller, I purchased a Quattro 48v 10kva inverter charger, a mkiii to usb adapter, a BMV712, a Venus GX and a wiFi long range module.

I have installed and have the BMV712 working at the quattro.

The system is located 100 metres from the house where we wish to monitor the state of charge and have ability to start and stop the diesel generator by remote using an existing portable device with bluetooth and wifi capability.


A couple of questions -

1. Have I been sold the correct equipment venus GX & long range WiFi to do what I wish to do?

2. If so, then how do I set it up?


thanks, in anticipation

Venus GX - VGX
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
JohnC avatar image
JohnC answered ·

Hi Daniel. Just adding to the other offerings:

1/ Yes, you have the correct kit. Should be a nice system.

2/ If you struggle with the wifi over the distance then there's also EoP to consider, given you're likely to have an electrical connection to the house. The Venus ethernet protocol link is your target. At the house, to a router (ideally).

Typically, once connected to the router it will be assigned a dhcp lan address (say 192.168.x.x), and if you type just that into a browser tab you'll have real-time monitoring & control over the Venus.

But sign it in to the VRM portal and you'll be amazed at the graphs etc. I leave a separate tab on my browser for that.

It's a very powerful system and can seem quite complex at first. But don't fear it - plenty info online and ongoing help from here too. Just ask..

A personal tip if you'll permit me - Treat it as a hobby, and enjoy the learning curve.. :)

Have fun.


2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

daniel1957 avatar image daniel1957 commented ·

Thanks JohnC - much appreciated!

I gave up on the Victron long range WiFi adapter (Gembird WNP-UA-002) and have already packed it up to return for refund.

When in the battery room I get reliable BMV712 bluetooth with its output to my phone but the Venus GX wifi is unreliable - I have diagnosed this as requiring input of the WiFi password on my phone each time I visit the battery room - very frustrating!

Surely in the battery room located within 1 metre of both BMV712 & Venus GX I should get reliable connection to both on the Victron Connect app on my phone without entering the WiFi password every time?

I have researched the EoP and it appears that it will work well up to 200 metres - so that is a good solution, thank you.


Now my next task is to work out why the VenusGX is reporting different SoC for the battery and power useage from the Quattro compared to the BMV712??

0 Likes 0 ·
JohnC avatar image JohnC ♦ daniel1957 commented ·

Good you asked a separate question for the SOC issue. Soon you won't need to go near the battery room. :)

0 Likes 0 ·
hobohome avatar image
hobohome answered ·

It depends what you mean by “long range wifi” .

If this is a USB dongle for the Venus GX, then (IMHO) this is not ideal. As I think this configuration will create a new wifi network.

The better solution would be to Ethernet wire the Venus to a wifi bridge to have that device connected to your home network.

I believe that this would provide all of the functionality you require while also allowing for future enhancements.

11 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ commented ·

Hi Hobohome; thanks for helping here. You wrote:

> As I think this configuration will create a new wifi network.

no its not like that. When inserting a USB-wifi dongle into a Venus GX; its used to connect to another network. Its not used for its self-created accesspoint.

> The better solution would be to Ethernet wire the Venus to a wifi bridge to have that device connected to your home network.

Regardless of what I said before; that I agree with. 100 meters is really long; could be too far away; even for the `long range module`.

Note that after this I have to step out; other things to do: anyone welcome to help here.

0 Likes 0 ·
Show more comments
daniel1957 avatar image daniel1957 commented ·

The VenusGX came in a Victron box with no instructions, no cables.

The Long range WiFi USB dongle is a generic brand sold by Victron Energy - # BPP900200200 - I don't know whether it goes in the house onto the PC or onto the VenusGX.

0 Likes 0 ·
Show more comments
daniel1957 avatar image daniel1957 commented ·

100 metres too long for a long range WiFi USB dongle??

I use a 1000 m long range BT USB dongle for my field work on my ToughPad to control my surveying instruments..

0 Likes 0 ·
Show more comments
daniel1957 avatar image
daniel1957 answered ·

Thanks Hobo


I have decided to go with EoP as it is cheaper, uses less energy and is more reliable...

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.