question

sesshoumaru avatar image
sesshoumaru asked

Quattro AC-out control

This may sound like a weird question, ... I understood from the Quattro's documentation that AC-2-out is only supplied with power if either AC-in-1 or/and AC-in-2 have an active source connected. However, can this be changed or is it fixed that way?


I idea would be that in case of grid failure (AC-in-1, AC-in-2 being genset off by default) the Victron system checks if it can supply both AC-outs and if so, both stay on. If one inverter (3-phase-system) is going to overloaded, then AC-out-2 is dropped.


Once AC-out-2 is dropped, I would like to ensure that once at least one AC-in is back (e.g. Genset kicks in) or I decide manually to try, that AC-out-2 is put back on. Is that possible (maybe with Assistants) or too far-fetched?


As always, thanks for taking time :)

MultiPlus Quattro Inverter ChargerESS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
snoobler avatar image
snoobler answered ·


https://community.victronenergy.com/questions/45885/can-i-make-ac-out-2-active-on-inverting-quatro.html




1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sesshoumaru avatar image sesshoumaru commented ·
Thanks, looks good - will try it out.
0 Likes 0 ·