question

hannibal23 avatar image
hannibal23 asked

VenusOS on Raspberry 3 B+

Translated by Google:

Hello, I have the latest version (2019-02-18 - venus-image-raspberrypi2.rpi-sdimg.zip) installed on an RPI 3 B +. It worked without error and I can see the blue Victron logo and prompt.

I can see the IP address of the PI in the router (cable connection) and in "Advance IP Scanner" (strangely, two IP's emerge). However, when I tried to connect using a browser (http://192.168.20.xxx), nothing happens. A ping to 192.168.20.xxx does not work either. A ping to localhost works though.

Venus OSRaspberry Pi
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

hannibal23 avatar image hannibal23 commented ·

THX... it works.


0 Likes 0 ·
1 Answer
markus avatar image
markus answered ·

Hi,

as far as I know, networking on the 3B+ only works with Venus Beta in the moment.

Have you read this?

connect-venus-rpi.html

I have a 3B+ running with LAN, working out of the box, on Venus 2.30-32

It should work from version 2.30-16 upwards.

Regards,

Markus


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.