question

Maybe only a cosmetic issue on Relay 2 as this has no effect on the function. But "Funktion (Relais 1) {2)?}" doesn't sound correct.

I'm still having a strange doubling of kWh consumption showing in VRM Overview but not showing on the advanced graphs or flow overview. This is since v2.80~36 and now ~38

Is this related to: "When AC input set to "Not available" Consumption is doubled" ?

https://github.com/victronenergy/venus/issues/862

But I haven't changed the AC input setting, which says 'Disconnected' (when generator not running) and I cannot change it either, if that was the issue - System is off grid with generator on ACin1.

Here it shows double consumption:

06:00 - 06:59 above shows 0.46kWh, but below I see for that hour the average was closer to 250wh not 460wh average and didn't even get close to 460w during the hour.

venus-image-raspberrypi2-20220115193611-v2.80~38.rootfs.wic

# opkg update
Downloading https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/all/Packages.gz.
Downloading https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/cortexa7hf-neon-vfpv4/Packages.gz.
Downloading https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/raspberrypi2/Packages.gz.
Collected errors:
 * opkg_download_backend: Failed to download https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/all/Packages.gz, wget returned 8.
 * opkg_download_backend: Failed to download https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/cortexa7hf-neon-vfpv4/Packages.gz, wget returned 8.
 * opkg_download_backend: Failed to download https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/raspberrypi2/Packages.gz, wget returned 8.

Another minor issue: in the GUI System Setup/Battery Measurements

If you make a battery visible and change the name to a custom name (in the same menu), the custom name does not appear in Battery Measurements menu until after a reboot.

Since installing (38) I have noticed I am losing consumption historical data in the VRM, as solar comes on line each day no consumption data is displayed and my "to battery" and "direct" data is skewed.

The real time data looks fine, seems to be a datalogging issue. I have toggled "has DC"

I will re load the previous and test to prove over the weekend and report back..

I lost Bluetooth at 05:59 this morning, so no Bluetooth or I/O menu options, I've done a reboot of the CCGX and only two of the four Ruuvi's have come back, I'll try bringing the other two closer, but they were in range before and worked the last few days fine.

*Edit:

I moved the two disconnected Ruvvi's closer and they re-connected in seconds, but after putting them back they lost connection again a few times, I'm not sure why they would have worse range today?

*Edit 2:

I was able to move the Bluetooth Dongle to a more central position and the two Ruuvi's with poor connection seem happy now, but still strange for them to be worse today after the last few days of being fine.

As a side note, I have found the CCGX has been rebooting itself once or twice a day on the v2.80X, it just did it again at 12:18 (UK Time) I wonder if I'm at the processor limits with an original CCGX and GuiMods, or if others are also less stable?

*Edit 3: CCGX Just rebooted itself again today @ 16:42