question

tmartin000 avatar image
tmartin000 asked

Can you set output current too?----Orion-Tr Smart 12/12-30

Orion-Tr Smart 12/12-30

Trying to add this between vehicle start battery(s) on a diesel truck and my Victron system. I just wanted to know if I can set the output current level from the device?

orion-tr smart
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @tmartin000,

this is currently not possible. Maybe a new feature some day, but at the moment not.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bathnm avatar image
bathnm answered ·

Unfortunately there is no current sensing capability within the unit, so will not happen. I had always hoped it would be a firmware upgrade until someone told me that the hardware to that wasn’t inside the unit!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.