This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
I am still trying to debug my new setup ,
I have a <LYNX bms, 3x200 smart Li, Cerbo gx and a Multiplus
All firm ware is current
I have not been able to get almost any of the VE Can data from the LYNX BMS on VRM. all the VE BUS and Venus data appears. I have activated all the widgets. Id really like to be able to see cell voltage and temp
.
Ive re read all the manuals and cant figure this out
Thoughts?
Working as designed. The widgets displayed on VRM do not have any data as this version of the Lynx BMS is not able to report this data. I believe that the widget is a generic widget and that there are other BMS's (such as the Lynx Ion BMS, a previous generation) which did report these values.
The Lynx Smart BMS is unable to display cell level details, as it has no ability to read the cell data from the Lithium Battery. The device is unable to report the battery temperature as there is no probe to monitor this. There is no externally controlled relay and so the relay state is not displayed.
I suspect as the product and VRM developed data that can be fetched and displayed will be and that these widgets may change.
