This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Can someone please advise on what the maximum amount of solar panels I'm able to connect to a mppt 75/10. The only actual limitation (not considering the 10A maximum charging capability) it seems is the 75V Voc rating if I'm correct?
If a 100W panel with a 22.3v Voc is to be used...
It's my understanding: 75/22.3 = 3.36
Meaning a maximum of ×3 of the above mentioned panels
You also have to calculate the string voltage in the lowest possible temperature for that place (in cold weather, panel voltage can be higher than Voc). This must remain under 75V (for that 75/10 charger).
Regarding the total power of your PV array, it depends on the battery voltage (higher is better). You can oversize the array (for cloudy weather/winter production), but do not exaggerate.
Thank you for the quick response
Considering I only have a limited amount of the actual solar panel specifications available, how does one go about doing this?
22.3V x 3 = 66.9V
That is relatively close to 75V.
How cold can it be in your area (during the day)?
Did you already bought the panels and the 75/10 charger?
But I recently haven't had the opportunity to actually travel a lot..
Was planning on using the system to power a bunch of 12v downlights in my house (to keep the lights on during power failures)
But the only spot I can temporarily place my solar panels doesn't exactly get the best sun during the day.. hence the additional panels..Temperatures normal vary between 20°c - 28°c (average maximum winter and summer temp.)
