MultiPlus-II 48/3000/35-32,fronius 5.0.1

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

florianchiajna asked Dec 28, '21

How do I connect Fronius Primo 5.0-1 WLAN / LAN / web server to Victron MultiPlus-II 48/3000 / 35-32? Are there drawings available?

Multiplus-II

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-12-28T10:59:22Z

markus answered · Dec 28, 2021 at 10:59 AM

Hi,

for this, you need a GX device.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

florianchiajna commented · Dec 29, 2021 at 07:49 AM

Are GX este modelul cu trei componente: EasySolar-II GX , MultiPlus-II 48/3000/35-32 (ACOut2 comutabil) , SmartSolar Charger MPPT 250/70

0 ·

Answer 2 · 2021-12-29T07:27:58Z

florianchiajna answered · Dec 29, 2021 at 07:27 AM

Has GX is the three-component model:EasySolar-II GX ,MultiPlus-II 48/3000/35-32 (ACOut2 switchable) ,SmartSolar Charger MPPT 250/70

easysolar-ii-gx-48-3000va-35-32-mppt-250-70-gx-con.png (14.0 MiB)

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

markus ♦♦ commented · Dec 29, 2021 at 07:52 AM

Your EasySolar2-GX has a GX device included.

Basically, you just need to connect the LAN ports of the Easy and the Fronius with a straight LAN patch cable.

BR

0 ·

florianchiajna markus ♦♦ commented · Dec 30, 2021 at 05:41 PM

thank you very much

0 ·