question

Jamie Greenaway avatar image
Jamie Greenaway asked

Are Multiplus voltage sense cables still required when using a BMV?

Just trying to work out.. I have a 24v Multiplus, a BMV600S and a CCGX, DVCC is enabled. My understanding is the BMV is now the main source of voltage and SOC, current draw etc. But I think the system would benefit from the voltage sense cables on the multi since the BMS could still experience voltage drop if I'm not mistaken..? But if I connect the voltage sense pins will the system ignore them and still use the BMV for voltage measurement? Thanks

Multiplus-IIBMV Battery MonitorCCGX Color Control
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
klim8skeptic avatar image
klim8skeptic answered ·

Have a look at the CCGX manual. Re Shared Voltage Sense.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Jamie Greenaway avatar image Jamie Greenaway commented ·
It will use the best method.. I understand, but also says it will use the BMV.. so would I be right in assuming the BMV voltage measurement would override the multi's voltage sense measurement?
0 Likes 0 ·
Show more comments