question

lbpuma3 avatar image
lbpuma3 asked

ESS with 3xMultiplus 48/5000 DLG E-BOX and Kostal Piko 8.3

Hi,

I would like an ESS system with:

3x Multiplus 48/5000

1x Smartsolar 250/100

1x Kostal Piko 8.3 DCS


and battery from DLG (PYTES Energy)

12x E-BOX 4850

or

6x E-BOX 48100


Does anyone have experience with the batteries from DLG (PYTES Energy)?


Or with Kostal in an ESS system with Victron?


best regards

Thomas

Multiplus-IIESS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
ivo137 avatar image
ivo137 answered ·

Hello Thomas,

maybe a bit late in answering. I have a setup with 3x Multiplus II 48/8000 and 10x E-BOX 48100 attached for energy storage. The E-BOX battery works in combination with the Cerbo GX. I had to make a special cable to connect the CANbus interface from the battery to the Cerbo but that is about the only thing that is special about this particular battery. Worked 'out-of-the-box' for me.

Cheers, Ivo

8 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kejmyl avatar image kejmyl commented ·

hi, what sort of special cable you mean ? standard rj45 is not enough ?

0 Likes 0 ·
Show more comments
stony avatar image stony commented ·
Hello Ivo,


I'm also interested in feedbacks on the Pytes E-Box 48100 because of the price and the availability. I am using a Multiplus II 48/5000 with Cerbox GX and a Lynx Power Distributor. Just the batteries are missing du to the actual worldwide delivery situation. Can you please post your settings (especially voltage values) of the battery setting within the VE Config (Charger settings). I tried to get these values from pytes - but didn't got a proper information till now.


Best regards, Thomas
0 Likes 0 ·
Show more comments
chrisu313 avatar image chrisu313 commented ·
Hello Ivo,


I am installing 3 Multiplus II 48/5000 with Cerbo GX and 4x E-Box 48100.

Thank you for the pin configuration of the BMS cable. Did you change the dip-switch settings on the E-Box? Mine where all "off".

Are you using the temperature sensors which are delivered with the Multiplus II?


Best regards, Christian.

0 Likes 0 ·
Show more comments