question

erb9784 avatar image
erb9784 asked

Split Phase Setting?

For the life of me, I can't figure out where to set my 2 MultiPlus 24v to 180 split phase. I've updated the firmware on both, but I don't see anywhere to set them in split phase. Help!

VictronConnectsplit phase
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
snoobler avatar image
snoobler answered ·

Must be configured to operate in Parallel using VE Bus software.


https://www.victronenergy.com/upload/documents/Manual-VE-Bus-Quick-Configure.pdf


1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

erb9784 avatar image erb9784 commented ·

Thank you. I ended up setting them in split phase with the legacy apps. This article had me particularly annoyed because nowhere did it mention split phase other than the title


https://www.victronenergy.com/blog/2021/02/02/victronconnect-parallel-three-split-phase-setup-and-more/

0 Likes 0 ·