I’m moving through my Victron instal with AGM batteries. I’ve a temperature sensor with the Cerbo and one with the multiplus. Do I fit them both or is there some setup that I need to do?
asked
Which battery temperature sensor do I use
Hi @Rupez1,
depends on what you want to measure. If you want to measure battery temp, one temperature sensor is enough. Use the one coming with the MultiPlus and plug it into the Cerbo GX I/O ports as well as to the battery. Enable DVCC in the Cerbo GX settings and then enable STS (Share Temperature Sense). This will share temperature also with the MultiPlus.
Is that the sensor with the black tape on the lug And will it go to any battery negative post ?
Hi SteFannie.
thank you.
Hi
@Wenlar@telus.net,
yes, although I think this feature is enabled by default.
But you don't need necessarily a temperature sensor connected to the MultiPlus. You also can connect a temperature sensor to your GX device or BMV/SmartShunt and then select this as your primary sensor for temp compensation. Data will be shared from your GX device via VE.Bus to the Multi.
