This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
So I have a ve bus BMS connected to the system and it says I should remove the RJ 45 cable before remote updating the vebus quattro. The problem is once I remove the cable the internet goes off because the router is connected to the inverter power. How can I resolve this? Also my quattro firmware version is 460, should I update to 490?
The changelog can be found here:
https://professional.victronenergy.com/
(free account needed)
You have to make the locally with a MK3 interface connected to the Quattro or you need to power your router from an external power supply.
