question

jonimthomas avatar image
jonimthomas asked

Data (last full discharge) Discrepancy between SmartShunt and Smart Lithium

SmartShunt indicates 0s "Time since last full charge" and SmartLithium indicates 12d 0h since last full charge

Also State of Charge indicates 100% yet SmartLithium indicates 12d 0h since last full charge

SOC
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
bathnm avatar image
bathnm answered ·

What are your settings in the Smart Shunts for Charge Detection Time and tail current? What are you using to charge the batteries and what are their settings.

It could be as simple as the Lithium batteries have a slightly different algorithm and approach to setting full charge verses the smart shunt.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jonimthomas avatar image
jonimthomas answered ·

Battery Capacity 1200Ah

Charged voltage 13.2V

Discharge floor 50%

Tail Current 4%

Charged detection time 3m

Peukert exponent 1.25

Charge efficiency factor 95%

Current Threshold 0.10A

Time-to-go averaging period 3m

Currently using Shore Power to charge the batteries.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

Your settings are not correct, please look into the manual and/or watch this videos:

https://www.youtube.com/watch?v=4ReljfO3k6M

https://www.youtube.com/watch?v=mEN15Z_S4kE

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic