question

stigandresen avatar image
stigandresen asked

Connect 2x EasySolar-II GX 48/3000 together

Hi!


I'm looking to expand my system, and i do have a similar easysolar-II unit on hand.

Have anyone done this?


I guess it should be straight forward to connect?


Regards,Stig

EasySolar All-in-One
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
marekp avatar image
marekp answered ·

@stigandresen

You can connect it in parallel with the existing one if it is the same model and Rev.

You can connected to the separate circuits at home if they cannot work in parallel.

Only one GX controller can be used.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

stigandresen avatar image stigandresen commented ·
Thanks!


Should i then disconnect one of the GXes?

0 Likes 0 ·
marekp avatar image marekp stigandresen commented ·
@stigandresen

I have red here, that Victron suggests to disconnect one GX internally.

0 Likes 0 ·
stigandresen avatar image stigandresen marekp commented ·
Thanks! Will give it a go!
0 Likes 0 ·