This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a DMC connected to a Multiplus inverter/charger.
I would like to turn the multi off/on via VRM but realize this is not possible with a DMC installed. As I am not on site, if I can get a neighbour to simply unplug the rj45 cable from the DMC, will this then allow me to immediately see the switch options in the VRM or will I need a reboot .
note, I have my modem connected separately with a small inverter Connected to the battery bank.
yes that will work - you may have to do a re detect under settings/multiplus/advanced
Thank you. Paul B.
That didn't seem to work as I am still just seeing just"inverting" for the multiplus when in the VRM, with not option to "switch"
I'm wondering if I first need to turn the multi off manually and then go from there.
I would be grateful for any further advise.
Note, the firmware for the multi and the cerbo are up to date.
Please use the VRM Remote console to turn it off and on.
