question

jj-o-jj avatar image
jj-o-jj asked

which all in one product (charger/inverter)

I would need an all in one 24V solar charge controller/inverter/battery charger for off grid solar system. I would like to power AC 240V loads around 2000W - only during daytime, and some 12V small loads - 10-50W). Option to charge 24v batteries with generator and/or to power AC loads directly with generator is needed (power assist?). Also, i would like a device that does not need additional BT dongles/GX devices/USB interfaces in order to program battery charging voltages and power assist, so full programmability of the device thru BT or wifi is needed. Compatibility with BT Smart Battery Sense would also be nice. Battery charger should have low temp charging disconnect for lifepo4.


I dont know which is the correct one for me: EasySolar, EasySolar II GX, Multiplus Compact, Multiplus I or II (+separate solar charge controller) or something else.

I tried contacting Victron representative for our region, but he is "AFK".



EasySolar All-in-One
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
kevgermany avatar image
kevgermany answered ·

Afik there isn't a Victron all in one unit that does everything you want.

You're going to have to have multiple units. And compromise. Best to sit with the distributor and go through all the options. How long AFK?

Ultimately it will come down to which trade offs are most acceptable for you.

5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
I might add that the Easysolar II is probably a good start point, but it doesn't have dual AC input. So a 240V generator requires isolation from mains. It's also a collection of stand alone units in one box, so no single programming interface. Also no dual DC voltage.
0 Likes 0 ·
Show more comments
jj-o-jj avatar image
jj-o-jj answered ·

So mppt charger + Multiplus II +70€ usb cable (PC Victron MK3-USB interface (VE.Bus to USB)
) could also be a way to go?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marekp avatar image marekp commented ·

@JJ-O-JJ

Look at Victron price list and make informed decision.

24V system

EasySolar-II 24/3000/70-32 MPPT 250/70 GX € 1.924,00

or

MultiPlus-II 24/3000/70-32 € 1.342,00
+
Cerbo GX € 300,00
+
SmartSolar MPPT 250/70-Tr € 750,00
+
VE.Direct Cable 0,9m € 15,00

Total = € 2407,00

48V system

EasySolar-II 48/3000/35-32 MPPT 250/70 GX € 1.924,00
or
MultiPlus-II 48/3000/35-32 € 1.060,00
+
Cerbo GX € 300,00
+
SmartSolar MPPT 250/70-Tr € 750,00
+
VE.Direct Cable 0,9m € 15,00

Total = € 2125,00

You will also need with any system
Interface MK3-USB (VE.Bus to USB) € 70,00

You could go with GX version of MP-IIs but Cerbo is a better choice and cost is the same.

0 Likes 0 ·
kevgermany avatar image
kevgermany answered ·

For me, not clear what you want.

Do you have loads apart from AC and 12V? Specifically 24V.

You have no monitoring in the system. E.g. BMV712.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jj-o-jj avatar image jj-o-jj commented ·

"I would like to power AC 240V loads around 2000W - only during daytime, and some 12V small loads - 10-50W) ", so no 24V loads.

0 Likes 0 ·
kevgermany avatar image kevgermany ♦♦ jj-o-jj commented ·
Then the 48V system probably makes more sense. Make sure your panels are giving enough voltage. The system won't charge until panel voltage is more than 5V higher than actual battery voltage. So you need about 60V from your panels
0 Likes 0 ·