I´ve got a Lynx Smart BMS with the latest firmware and a Victron Lithium Smart 12,8V/100Ah Battery.
During discharge process a failure (BMS Cable Failure) occured. No cables were touched during or before the failure.
I tried another Victron Lithium Smart 12,8V/100Ah Battery which could be discharged for 5 minutes and after this the same failure (BMS Cable Failure) occured.
Switching back to the first battery didnt solve the problem. Leaving the Lynx Smart BMS currentless didn´t help either.
I´m connecting only one battery simultaneously without any extension cable. The connection port for the BMS cable is intact.
What can I do ? Is there a reset option ?