question

chrispendl avatar image
chrispendl asked

One of two Skyllas not charging

I have two Skyllas ip-65 connected to each other via VE Can (same firmware, same settings) and for some reason one of them charges, while the other one just sleeps. When I "wake up" the sleeping Skylla, it will briefly show up on Cerbo and then becomes unavailabe. There are no error codes, and the unit is receiving 110VAC.

Both are running firmware v. 1.10.


screen-shot-2021-11-21-at-35146-pm.pngThis is the sleeping one


screen-shot-2021-11-21-at-35140-pm.pngThis is the working one.

screen-shot-2021-11-21-at-35153-pm.png


Skyllaip65
screen-shot-2021-11-21-at-35146-pm.png (4.1 MiB)
screen-shot-2021-11-21-at-35140-pm.png (2.3 MiB)
screen-shot-2021-11-21-at-35153-pm.png (2.6 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
edwin-earthcruiser avatar image
edwin-earthcruiser answered ·

Hello,

Have you found the solution for this?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic