This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi I have connect a Color control to the Easy Solar-II GX. It is showing all values expect there is no PV box showing the solar production, The easy solar is showing the PV production on its small display. Since it is sending the data of everything else to the color control Im assuming the cabling is correct. Is it a set up function I have missed to send the PV data to the color control?
Yes showing on display of the easy solar but not the color control. We did wire in a VE direct cable there was only 1 VE direct input on the easy solar
This is not how it is designed.
The EasySolar already have a GX device build in. I'm surprised that the VE.Bus connection is working.
Inside the EasySolar is a Smart Solar MPPT and you have to connect a VE.direct cable from the CCGX to it.
You also should disconnect the the VE.Bus from the GX device inside the EasySolar.
Oh really so It can work but needs to be internally wired to the MPPT? It there a way to have and external monitoring device to show the details?
