I think honestly this is the most frustrated I have ever been with any DIY project I have ever done. To put is short I will pay someone for 30 minutes of their time to tell me what the proper settings are the the Inverter, Solar Charge Controller, Shunt and Remote Control Multiplus Panel. All I need is screen shots. Everything is brand new and works but I do not trust the settings I have put in. I will take texts of screen shots to 651-248-1941 and I will pay you for your time. Please someone help me and others and then I will make a video for YouTube so others have it also. Even if you only have info for one of the items please send screen shots or post them here.
I have the following:
1. Lithionics 315ah Battery
2. Victron 3,000 Multi Plus Invertor
3. Victron Smart Shunt 500A/50mv
4. Victron 100/50 Solar Charge Controller
5. Victron GX Display and finally
6. Victron Multi "Remote" Control 200/200A GX.
The final piece that put me over the edge was the Remote Control unit for the Inverter. I hooked up the RJ45 cable to it thinking it would turn on and all I get is the LED read out that I can adjust from 1 to 16. I don't get any other lights and switching between On and Charge Only no lights come on. The inverter is turned to the on position and nothing on the remote control.