question

andvib avatar image
andvib asked

VE smart networking "waiting for data" BMV 712 / MPPT 100/30

After apparently successful firmware updates performed yesterday, voltage data from BMV 712 is not received by MPPT anymore. BMV 712 says transmitting, MPPT says waiting for data. tried creating new network, did not help.


BMV Battery MonitorVE.Direct Bluetooth Smart Dongle
screenshot-20190309-223225-comvictronenergyvictron.jpg (125.7 KiB)
screenshot-20190309-223152-comvictronenergyvictron.jpg (189.0 KiB)
screenshot-20190309-223116-comvictronenergyvictron.jpg (200.7 KiB)
screenshot-20190310-094725-comvictronenergyvictron.jpg (300.8 KiB)
screenshot-20190310-094637-comvictronenergyvictron.jpg (289.1 KiB)
screenshot-20190309-223225-comvictronenergyvictron.jpg (125.7 KiB)
screenshot-20190309-223152-comvictronenergyvictron.jpg (189.0 KiB)
screenshot-20190309-223152-comvictronenergyvictron.jpg (189.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Paul B avatar image
Paul B answered ·

Try removing the network on both devices. then de Power both devices. for say 5 min, then reconnect and resetup the network, and see if that helps at all

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

andvib avatar image andvib commented ·


Thanks for your suggestion: de powered multiplus, de powered (disconnected) smart dongle from MPPT, reconnected and resetup, status quo.

note that BMV 712 has not been made powerless, as I am a complete newbie at this: will disconnecting and reconnecting my BMV 712 affect or reset any measurements?

0 Likes 0 ·
img-20190310-103910.jpg (2.3 MiB)
img-20190310-104014.jpg (2.5 MiB)
Paul B avatar image
Paul B answered ·

Remove the clip in plug on the back of the BMV

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

andvib avatar image andvib commented ·

thanks, hmm, still status quo. BMV now showing 100% soc (is really 88% or there about. will be corrected in time I think as mppt is still charging battery?

0 Likes 0 ·
andvib avatar image andvib commented ·

did a full de power and reinstall using ios device (successfully only used Android device previously) but still status quo. BMV and MPPT both connected to network but BMV transmitting data and MPPT waiting for data. last firmware update assumed culprit.

0 Likes 0 ·
iron-quail-ranch avatar image iron-quail-ranch andvib commented ·
Did you ever get this resolved? I am having similar problem, looking for solution.
0 Likes 0 ·
Michael Connolly avatar image
Michael Connolly answered ·

I had a similar problem, try a Bluetooth repeater!!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron BMV battery monitors product page

Additional resources still need to be added for this topic