Hi,
I have just helped a friend to configure a MultiPlus Compact 12/2000/80-30. Target was to change settings to use it with LiFePo4 batteries with VE configure software with the Victron MK3 - USB Interface. Configuration was applied as expected.
Then we tried the Victron Connect app on PC, and it tried to connect to the MultiPlus over MK3 USB interface. After a while it stated that the firmware was outdated, and needed to be upgraded to 2xx or above. So we started to see if there where any options to upgrade the firmware on the older MultiPlus.
Found the current version 1908129 and after reading up on the firmware documentation. Then I found out that I can select from 2 versions of firmware:
Non assistant firmware: 1908159
Assistant firmware: 1908209
What are the differences of Assistant and Non assistant, and are both compatible with the MultiPlus? I assume that only the assistant version will work with the Victron Connect software?
-VGA