I have a new install multiplus 12/3000/120/16 (1 mth old now)
This issue is that if you turn the Multi off using its rocker switch on the multi then it will not turn back on when the rocker switch is put back in the on Position.
Temporary solution is to removed /unplug the CCGX VE bus cable and it turns on and you can then replug in the VE Bus and all works fine.
but this is not a very professional solution.
This is getting the customer very annoyed
does anyone have any solution or a better work/around
Equipment list
Multiplus 12/3000-120-16 F/W 433
CCGX F/W 2.23
VE-BMS
using Lithium assistant with 1 circuit BMS
5kW of CalB LP Batteries
8 x EV power BMS cell balancers connected to the VE-BMS
Thanks