I recently installed a Cerbo GX and connected my 4 bilge pumps to the digital inputs. I can see the various parameters that each digital input outputs to my N2K network. One of the data elements is cycle count. I'd like to set an alarm if any bilge cycles more than 15 times in any 24 hours period. I see in VRM alarm settings I can set an alarm for cycle counts but there doesn't appear to be anyway to reset this parameter to 0 once per day. If the cycle count is cumulative it becomes a meaningless parameter after a period of time. Any ideas how I can reset this every day or accomplish what I'm trying to do?
I've set another alarm if the input state is "on" for more than 60 seconds. If the bilge runs for more than 60 consecutive seconds the bilge either has an air lock or there is some sort of flooding. In addition to cycle count tracking I'd like to track cumulative run time in a 24 hour period, anyway to do this?
Thanks
