Hi Everyone
We're going completely offgrid due to the distance we are from power lines. I'm needing some guidance on a good offgrid setup and how to go about building it and programming it. Here's what I'm planning on using:
- Victron 48/500/70
- Victron Colour control GX
- Victron 85 amp controller
- JA Modue Solar 390W panels
- BYD 4.0kwh x4 with BMU and unit OR 4x Pylontech 3.55kwh
- Timber ground mount with flush mount system
I'm having a couple of electrician buddies coming around to give me a hand installing it all but they haven't every installed offgrid solar before.
My questions are:
1. Is installation a fairly straightforward process for your average electrician or even home handy man?
2. Is there anything I need to be aware of before we get to work?
3. Is the programming fairly straight forward?
4. Is there any issues with either of these setups or recommendations on a better setup?
5. Good bang for buck?
Thanks in advance!