My system consists of Victron Easyplus, Blue solar MPPT, CerboGX, Sterling B to B and BMV 712. Battery bank is a self build Lithium 280ah with Daly BMS. I have checked and double checked my wiring and settings and cant understand why the BMV is not operating as expected. There are no loads connected between the shunt and battery the BMS is on the load side of shunt. The BMV is permanent 100% SOC, does not show any AH Consumed and no discharged energy. The loads are the Easyplus in AES mode with a 240v fridge coming on for approx 3mins per hour with a load of 2.6a. The BMV seems in permanent charge condition with 18a & 250w even though there are no charge sources other the MPPT or Easyplus when on shore. So shows the same situation at night and without EHU hook up. Would appreciate help to sort this out it's driving me nuts.