question

magicmike avatar image
magicmike asked

VictronConnect "switch to grid" timer - software glitch?

NoHi

I tried to work it out somehow but no matter what I set up its switching to grid after 15 maybe 20sec.

I need it set something between 2-5mins.

Changing loads etc no makes any difference.

15sec, top 30 and switched.


It's under multiplus 48/3000

Check out please.


Cheers.

VictronConnect
6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jperez (Victron Energy Staff) avatar image jperez (Victron Energy Staff) ♦♦ commented ·
Noted down, we are going to take a look soon but it can take a couple of days until we can provide an answer.
0 Likes 0 ·
magicmike avatar image magicmike jperez (Victron Energy Staff) ♦♦ commented ·

Really appreciate it i want to keep generator running without load for couple of mins to warm up before it 'hits' full load on it.
I've paid over 2k for generator and don't want to brake it after few weeks.


Thank you,

0 Likes 0 ·
Show more comments
3 Answers
magicmike avatar image
magicmike answered ·

Up, I'm sure Devs needs to look into this

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

Make some screenshots of the settings you tried.

0 Likes 0 ·
magicmike avatar image magicmike Matthias Lange - DE ♦ commented ·

screenshot-2021-10-20-001700.png

screenshot-2021-10-20-001705.png

screenshot-2021-10-20-001718.png

I think i tried everything and most of silly settings.

Switch takes 15-25sec.

0 Likes 0 ·
screenshot-2021-10-20-001700.png (175.3 KiB)
screenshot-2021-10-20-001705.png (150.9 KiB)
screenshot-2021-10-20-001718.png (179.0 KiB)
magicmike avatar image
magicmike answered ·

bumpbumpbump


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

magicmike avatar image
magicmike answered ·

Bump Bump bump


Both problems still occurs for Old Multiplus and new Multiplus II / VictronConnect and newest FV 490

Timers does not work for me and same as option:

'AC INPUT CONNECT BASED ON LOAD'

Looks like Load must be SET UP for minimum 800W for both Inverters.

Delay does not work for me at all.


Over all its makes me sad big time because any day and any time due these settings hard load start on generator can kill it.

Once i start generator i need extra 8amps on both lines so 16amps straight on.

I paid over 2000 euro for generator and i don't want to kill it in few months time and i need gen back up no matter what.

As i cannot upload file here on forum;

https://www.mediafire.com/file/4vny3tmn1r2w0nb/asd.vcsf/file

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

VictronConnect Manual

Download for iOS / Android / Mac / Windows