question

ken-dauber avatar image
ken-dauber asked

VE.Direct Dongle with BlueSolar MPPT connects but fails at 95%

I have a new bluetooth dongle connected to an existing BlueSolar MPPT MPPT 150/35. It's visible in VictronConnect, and shows the correct solar controller. However, it always fails connecting at 95%. I've reproduced on Android, iOS, and Mac.

VE.Direct Bluetooth Smart Dongle
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thiemo van Engelen (Victron Energy staff) avatar image Thiemo van Engelen (Victron Energy staff) ♦ commented ·

Hi @Ken Dauber

Can you please make a service report of the connection attempt and post that here in a comment? The procedure on how to make a service report is described here: https://ve3.nl/VictronConnect_How-to-create-a-VictronConnect-Service-Report

Kind regards,

Thiemo van Engelen

0 Likes 0 ·
0 Answers

Related Resources

Additional resources still need to be added for this topic