GuiMods on v2.80~24 issue

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

mvader (Victron Energy) asked Oct 15, '21

As reported by @dsfas9 , there seems to be an issue with the gui mods.

the complaint was: "Getting blank page running ~24 with Gui Mods. Reverted to ~17 to fix the issue."

I've made a separate question here; to keep it out of the main ~24 thread .

here the screenshot:

Venus OS

1634329637882.png (271.2 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-10-17T04:45:27Z

Kevin Windrem answered · Oct 17, 2021 at 04:45 AM

This should be fixed now with v3.16.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2021-10-17T22:14:53Z

dsfas9 answered · Oct 17, 2021 at 10:14 PM

@Kevin Windrem did something change to auto update? I am stuck on v3.15 and setup helper 2.10

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2021-10-18T05:01:47Z

Kevin Windrem answered · Oct 18, 2021 at 05:01 AM

Oops. The current tag didn't get created for GuiMods v3.16. Should be OK now.

5

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dsfas9 commented · Oct 18, 2021 at 03:59 PM

Still blank on v3.16, but auto-update worked.

0 ·

capture-10-18.jpg (187.6 KiB)

Show more comments